| 1. | The YPVS servo motor starts to open at about 6, 000rpm.
|
| 2. | The computer drives the platform roll and pitch gimbal servo motors.
|
| 3. | Stepper motors or servo motors are typically employed to move the extrusion head.
|
| 4. | :A three phase system is likely a servo motor not a stepper motor.
|
| 5. | R2 is equipped with 54 servo motors and has 42 degrees of freedom.
|
| 6. | The gimbal servo motors position the gimbals to compensate for the original deviation.
|
| 7. | Vane angles are varied using cams driven by servo motor ( actuator ).
|
| 8. | The servo motors and the servo amplifiers were supplied by Evershed Power Optics.
|
| 9. | The spinning of the disk also uses a servo motor.
|
| 10. | The main rudder servo motors were completely unserviceable, and the turbo-dynamos were severely shaken.
|
मोबाइल